// 500+ Brands

// Authorized Distributor of Over 100 Brands

Belimo G6100CS-250+EVB24-SR

SKU: CS3357856MPN: G6100CS-250+EVB24-SR

Globe Valve (GV), 4”, 2-way, ANSI Class 250, Cv 170 |Valve Actuator, Non fail-safe, AC/DC 24 V, 2...10 V, modulating

Product Details

Globe Valve (GV), 4”, 2-way, ANSI Class 250, Cv 170 |Valve Actuator, Non fail-safe, AC/DC 24 V, 2...10 V, modulating

Attributes

Control modulating
Valve Size 4” [100]
Cv 170.0
Flow Pattern 2-way
Fail-Safe Non-Spring Return
Valve Trim Stainless steel
Nominal Voltage AC/DC 24 V
Close-Off Pressure ∆Ps 250 psi
Transformer Sizing 7.5 VA (class 2 power source)
Enclosure UL Enclosure Type 2
Pressure Independent NO
Power Supply 24 VAC, ±20%, 50/60 Hz, 24 VDC, ±10%
Power Consumption In Operation 5 W
Power Consumption In Rest Position 1.5 W
Electrical Connection 18 GA plenum cable, 3 ft [1 m], with ½” conduit connector, degree of protection NEMA 2 / IP54
Overload Protection electronic throughout full stroke
Operating Range 2…10 V, 4…20 mA w/ ZG-R01 (500 Ω, ¼ W resistor)
Input Impedance 100 kΩ for 2…10 V (0.1 mA), 500 Ω for 4…20 mA
Position Feedback 2…10 V, Max. 0.5 mA
Direction Of Motion Motor selectable with switch 0/1
Position Indication Mechanically, with pointer
Running Time (Motor) 90 s, constant, independent of load
Ambient Humidity max. 95% r.H., non-condensing
Ambient Temperature -22…122°F [-30…50°C]
Storage Temperature -40…176°F [-40…80°C]
Fluid chilled or hot water, up to 60% glycol, steam
Controllable Flow Range stem up - open A – AB
Pipe Connection 250 lb flanged
Ansi Class 250
Number Of Bolt Holes 8.0
Maximum Inlet Pressure (Steam) 100 psi [690 kPa]
Max Differential Pressure (Steam) 50 psi [345 kPa]
Rangeability Sv 98:1
Fluid Temp Range (Water) 32…350°F [0…176°C]
Degree Of Protection Iec/En IP54
Degree Of Protection Nema/Ul NEMA 2
Connection cable
Cv Range [Gpm] 48…197
Pipe Connection Type flange
Kvs Range [M³/H] 41…170 m³/h
Stroke 2” [50 mm]
Flow Characteristic equal percentage
Servicing repack/rebuild kits available
Valve Body Cast iron - ASTM A126 Class B
Valve Plug Stainless steel
Stem 316 stainless steel
Seat Stainless steel AISI 316
Stem Seal NLP EPDM (no lip packing)
Housing Material Die cast aluminium and plastic casing
Nominal Voltage Dc 24 V
Nominal Voltage Ac 24 V
Noise Level, Motor 60 dB(A)
Body Pressure Rating ANSI Class 250, up to 280 psi below 350°F
Electrical Protection actuators are double insulated
Quality Standard ISO 9001
Fluid Temp Range (Steam) 32…338°F [0…170°C]
Agency Listing cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2014/30/EU and 2014/35/EU; Listed to UL 2043 - suitable for use in air plenums per Section 300.22© of the NEC and Section 602.2 of the IMC
Fail-Safe Function Non fail-safe
Control Type Web DC 2…10 V
Fail-Safe NO

Specifications

SKUCS3357856
MPNG6100CS-250+EVB24-SR