Dwyer 2000-0AV

Name: Dwyer 2000-0AV
Brand: Dwyer
SKU: CS3114280
Price: 140.95 USD
Availability: OutOfStock

SKU: CS3114280MPN: 2000-0AVAlternate Part #: 102043-10

2000-0AV MAGNEHELIC GAGE

$140.95

Unit

Available on backorder

Quantity

remove

add

Product Details

Differential pressure gage, range 0-0.50” w.c., velocity 500-2800 FPM, calibrated for vertical scale position, ±3% accuracy.

Accuracy	±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100PA, -125PA, -10MM and ±4% (-HA ±2%) on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
Commodity Code	1200
Compliance	Meets the technical requirements of EU Directive 2011/65/EU (RoHS II). Note: -SP models not RoHS approved.
Enclosure Rating	IP67.
Housing	Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.
Overpressure	Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
Pressure Limit	-20 in Hg. to 15 psig.x0080 (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar).
Process Connection	⅛” female NPT duplicate high and low pressure taps - one pair side and one pair back.
Service	Air and non-combustible, compatible gases (natural gas option available). Note: May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Size	4” (101.6 mm) diameter dial face.
Standard Accessories	Two ⅛” NPT plugs for duplicate pressure taps, two ⅛” pipe thread to rubber tubing adapters and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)
Wetted Material	Consult factory.