Valve Accessories

REBUILD KIT FOR ¾”, 2.0 CV VP525A. W/TOP AND INSERT ASSY, VALVE SEAT, FITTINGS, SPRINGS. EXISTING VALVE BODY MUST BE REUSED.

RECOND KIT NO ¾” CAGE; TRIM VALVE CV\=8.6

Repair Kit “A”; Sz 55AL

Input Electric Actuator Drive, 4-20 mA DC, 120/240VAC, Mounts Directly to Gear Train Actuators

Rebuild Kit

Ball Valve Actuator Anti-Rotation Mounting Clip

Zone Connection Set, DN20 valve, G¾ to 15mm Solder - 1 pcs (1 pcs per port needed).

Erie PopTop Valve Body Rebuilding Kit for 3-Way ½ in \& ¾ in Valve Body with Sweat Connection and 1.5 to 5.0 Cv

Spring: 10-13 PSI, Gray, Used With MK-4621

SE8000 Series Kit of Base Plates QTY 4

VT8000 Series Kit of Base Plates QTY 4

KIT; PRECEDENT SHORT ORIFICE TO TXV UPGRADE (T/Y)HC092

Rebuild Kit 8210 Ac

GASKET; .03 THK X 8.31 X 9.02

Rebuild Kit 8210 Ac

DISK; RUPTURE, 3 IN.NPS, 15 NPS/300F 150# FLANGE RATING

COVER, VALVE, 11.32 X 11.42

16F24O2164ACFR Gold Ring Solenoid Valve Repair Kit

Rebuild Kit 8215 Ac

Rebuild Kit 8340 Ac

Rebuild Kit 8210 Ac

LINKAGE WRENCH

VB-7xxx ½ in to 2 in Two and Three Way Bronze Globe Valve Forta Linkage Kit

Bracket Nut For VB-8213 Valves

Valve Stem Packing Kit - V61, RA Valve

STEM-COUPLER

SPR-COMPRESS SCR

Stepper Motor, 24 VAC, 60CY 5

Zone Valve Connector, Threaded, DN20, G¾ to R½.

2-½ INCH VB-8xxx Wiper O-Ring

3 INCH VB-8xxx Wiper O-Ring

4 INCH VB-8xxx Wiper O-Ring

5 INCH VB-8xxx Wiper O-Ring

6 INCH VB-8xxx Wiper O-Ring

TAC Xenta 400 Terminal Part

Stepper Motor, 277 VAC, 50/60 Hz

Stepper Motor,120 VAC, 60 CY 5

Stepper Motor, 277 VAC, 60CY 5

Stepper Motor, 230 VAC, 50 Hz

Stepper Motor, 230 VAC, 60 CY 5

Erie PopTop Valve Body Rebuilding Kit for 3-Way 1 in NPT and 1-¼ in Sweat Valve Body and 7.5 Cv

Erie PopTop Valve Body Rebuilding Kit for 2-Way 1 in NPT and 1-¼ in Sweat Valve Body and 7.0 Cv

Rebuild Kit 8215 Ac

Rebuild Kit 8030 Ac

RECOND KIT NO ½” CAGE; TRIM VALVE CV\=1.2

RECOND KIT NO ½” CAGE; TRIM VALVE CV\=4.4

Actuator Drive, 4-20 mA DC, 120/240VAC, Weather Resistant

RECOND KIT NO ½” CAGE; TRIM VALVE CV\=2.2

RECOND KIT; .5” NC CAGE; TRIM VALVE CV\=.2

RECOND KIT; .5” NC CAGE; TRIM VALVE CV\=.4

RECOND KIT NO ½” CAGE