Sensors

6900507 - HF

80X80 NETWORK WALLPLATE; PLATE FOR MOUNTING A 80X80 NETWORK SENSOR ON A 2X4 WALLBOX IN EITHER VERT

Gray cover with Barber-Colman logo dial

Temperature Sensor, Duct w/ Mounting Box, Probe Length: 12” (305mm), 10K T3, Thermistor, Resistive Output

T Series temperature sensor, duct with mounting Box, 8” probe, 10K type 3 thermistor, resistive output

PRESSURE CONTROL; 400-300 # OPENS ON RISE; AUTO RESET

Contact temperature sensor passive, Ni1000 (JCI)

ENCAPSUL PRESSURE CONTROL; 5-20# OPENS ON FALL; AUTO RESET CONDUIT CLAMP

Pocket Wrench With 5/64” Allen Wrench For Branch Test Port on Pneumatic Thermostats and Locking Cover Screws and 0.048” 6-spline Wrench

Room Temperature Sensor, 1k Ohm (385a) Pt RTD

PTC SILICON SENSOR; WITH PVC CABLE LENGTH 6 ½ FT (2M) SENSOR RANGE -40 TO 212 DEGREES F

Cover for Pressure Switch

GAS TBL METHANE 100% LEL

20K WATER TEMP SENSOR, 5 IN.INSERTION

WELL TEMP SEN 6”10K; WELL INSERTION TEMPERATURE SENSOR 10K OHM THERMISTOR 6 IN. PROBE

ET Series temperature sensor, 4”, immersion, 10K ohm thermistor, Continuum compatible, steel enclosure

Temp Sensor, SS Wall Plate, Acc: +/- 0.2 C, 10K Ohm Thermistor, Continuum, Schneider Electric Logo

SmartX Temperature Sensor, Resistive 10K Type 3 Thermistor, Blank, with Matte White Cover

PTC SILICON SENSOR; WITH PVC CABLE LENGTH 9 ¾” (0.25 M) SENSOR RANGE -40

Air Pressure Switch 0.10 -10.0 WC

Flush Mounted Temperature Sensor: 1k Ohm Platinum RTD Thermistor, Legacy

36 in. Thermocouple

ET Series temperature sensor, 12”, duct, 10K ohm thermistor, Continuum compatible, steel enclosure

Temp, Duct w/Mtg Box, 4 in , 10k w/11kS, RTD

PRESSURE CONTROL; CI 400+/-10; CO 300+/-; ¼” FEM FLARE W/DEFLATOR

TEMP SENSOR; 1000 OHM; NI; FOR WALL MTG.

24 in. Thermocouple

AVER ELEMENT HLDR QTY; AVER ELEMENT HLDR QTY \=10

DUCT 10K OHM THERMISTOR

Temp Sensor, 4” Immersion, Acc: +/- 0.1%, 1K Ohm BALCO, Steel Encl.

1/16 in. and ¼ in. hex head thermostat calibration and coverscrew wrench. (Also adjusts 2341 Series Receiver-Controllers.)

ET Series temperature sensor, 6”, duct, 1K ohm BALCO, steel enclosure

Temp Sensor, 8” Duct, Acc: +/- 0.2 C, 1.8K Ohm Thermistor, Vista, Steel Encl.

Fixing strap, with thermal paste for pipes up to Ø 1.6...9.8” [40...250 mm]

AA Series duct static pickup probe, 8”, dry pressure

DUCT PROBE SENSOR 8 INCH; 1000 OHM NICKEL - METAL ENCLOSURE

ET Series temperature sensor, 8”, duct, steel enclosure, 10k ohm thermistor, Continuum compatible

TEMP DUCT W/MTGBX 8IN 1K BALCO

Temp Sensor, 6” Immersion, Acc: +/- 0.2 C, 10K Ohm Thermistor, Continuum, Steel Encl.

Thermocouple DIN Rail Terminal Blocks, Narrow 10.7 mm Width

WELL TEMP SEN 6” 1K PT; WELL INSERTION TEMPERATURE SENSOR 1K OHM PLATINUM 6 IN. PROBE

Cable Clamp Standard Size Thermocouple Connectors

Duct/Immersion sensor Temperature passive, NTC20k, Probe length 6” [150 mm], Probe diameter 0.24” [6 mm]

Eaton E51 NEMA limit switch inductive proximity sensor reflector

STP Series pocket STP, 100 mm/3.94 in., brass

WELL TEMP SEN 6” 1K NI; WELL INSERTION TEMPERATURE SENSOR;1K OHM NICKEL 6 IN. PROBE

TE-6312M-1; WELL; 1000 OHM NICKEL WELL INSERTION 8 INCH PROBE

20K TEMP WALL MODULE

6900506 - HF

TEMPERATURE SENSOR; DUCT PROBE TEMP SENOSR 10K THERMISTOR 8” DUCT PROBE

-45/65°C Watertight Thermister

Bolt-On Thermocouple with SS Washer Housing

Standard Size Thermocouple Connectors

Factory Authorized Parts™ - 50HJ401431 Sensor

10,000 Ohm Thermistor (Type II), Room (R2), Setpoint 0 to 10K Ohms, Override, Cool/Warm Sticker

Cable Temperature Sensor with mounting flange passive, NTC10k (10k2), Probe length 8” [200 mm], Probe diameter 0.24” [6 mm], cable 2 m, 2-wire

Duct/Immersion sensor Temperature passive, NTC10k3 (Precon), Probe length 8” [200 mm], Probe diameter 0.24” [6 mm]

ET Series temperature sensor, 8”, averaging, steel enclosure, 10k ohm thermistor with 11k ohm Shunt, I/A compatible

TE-631AM-1; WELL; 1000 OHM NICKEL WELL INSERTION 6 INCH PROBE

Veris TW2 Series Temperature Sensor, Wall, 10K Type 3 Thermistor