Sensors

6900507 - HF

80X80 NETWORK WALLPLATE; PLATE FOR MOUNTING A 80X80 NETWORK SENSOR ON A 2X4 WALLBOX IN EITHER VERT

-40°/65°C Thermistor; 12” Leads

Gray cover with Barber-Colman logo dial

Temperature Sensor, Duct w/ Mounting Box, Probe Length: 12” (305mm), 10K T3, Thermistor, Resistive Output

T Series temperature sensor, duct with mounting Box, 8” probe, 10K type 3 thermistor, resistive output

PRESSURE CONTROL; 400-300 # OPENS ON RISE; AUTO RESET

Contact temperature sensor passive, Ni1000 (JCI)

ENCAPSUL PRESSURE CONTROL; 5-20# OPENS ON FALL; AUTO RESET CONDUIT CLAMP

Pocket Wrench With 5/64” Allen Wrench For Branch Test Port on Pneumatic Thermostats and Locking Cover Screws and 0.048” 6-spline Wrench

PTC SILICON SENSOR; WITH PVC CABLE LENGTH 6 ½ FT (2M) SENSOR RANGE -40 TO 212 DEGREES F

Cover for Pressure Switch

GAS TBL METHANE 100% LEL

20K WATER TEMP SENSOR, 5 IN.INSERTION

6-WIRE 2-RJ11 RS CABLE 50’PLMN

WELL TEMP SEN 6”10K; WELL INSERTION TEMPERATURE SENSOR 10K OHM THERMISTOR 6 IN. PROBE

ET Series temperature sensor, 4”, immersion, 10K ohm thermistor, Continuum compatible, steel enclosure

Temp Sensor, SS Wall Plate, Acc: +/- 0.2 C, 10K Ohm Thermistor, Continuum, Schneider Electric Logo

PTC SILICON SENSOR; WITH PVC CABLE LENGTH 9 ¾” (0.25 M) SENSOR RANGE -40

Air Pressure Switch 0.10 -10.0 WC

ET Series well, 4”, stainless steel

Weather Shield for QFA31xx Series Humidity Sensors (Required for Outdoor Use)

SmartX Temperature Sensor, Resistive 10K Type 3 Thermistor, Blank, with Matte White Cover

REPLACEMENT SENSOR BASE 2200/3200

PRESSURE CONTROL; CI 400+/-10; CO 300+/-; ¼” FEM FLARE W/DEFLATOR

Flush Mount Temperature Sensor, Metal, For Use with TEC Only

Flush Mounted Temperature Sensor: 1k Ohm Platinum RTD Thermistor, Legacy

TEMP SENSOR; 1000 OHM; NI; FOR WALL MTG.

24 in. Thermocouple

AVER ELEMENT HLDR QTY; AVER ELEMENT HLDR QTY \=10

36 in. Thermocouple

Surface Mount Temperature Sensor, 1k Ohm (385a) Pt RTD, Plastic

DUCT 10K OHM THERMISTOR

AA Series duct static pickup probe, 8”, dry pressure

ET Series temperature sensor, 12”, duct, 10K ohm thermistor, Continuum compatible, steel enclosure

Temp, Duct w/Mtg Box, 4 in , 10k w/11kS, RTD

Fixing strap, with thermal paste for pipes up to Ø 1.6...9.8” [40...250 mm]

DUCT PROBE SENSOR 8 INCH; 1000 OHM NICKEL - METAL ENCLOSURE

1/16 in. and ¼ in. hex head thermostat calibration and coverscrew wrench. (Also adjusts 2341 Series Receiver-Controllers.)

Temp Sensor, 4” Immersion, Acc: +/- 0.1%, 1K Ohm BALCO, Steel Encl.

Thermocouple DIN Rail Terminal Blocks, Narrow 10.7 mm Width

Remote Changeover Temperature Sensor for RCC, RCU and RDU Series Thermostats

ET Series temperature sensor, 6”, duct, 1K ohm BALCO, steel enclosure

Temp Sensor, 8” Duct, Acc: +/- 0.2 C, 1.8K Ohm Thermistor, Vista, Steel Encl.

10K TYPE II WATER TEMP SENSOR,

WELL TEMP SEN 6” 1K PT; WELL INSERTION TEMPERATURE SENSOR 1K OHM PLATINUM 6 IN. PROBE

Duct Point Temp Sensor, 1k Ohm (385a), Pt RTD, 18 Inch Rigid Probe

ET Series temperature sensor, 8”, duct, steel enclosure, 10k ohm thermistor, Continuum compatible

Duct Point Temp Sensor, 100k Ohm Thermistor, 4 Inch Rigid Probe

TEMP DUCT W/MTGBX 8IN 1K BALCO

WELL TEMP SEN 6” 2.25K; WELL INSERTION TEMPERATURE SENSOR 2.252K OHM THERMISTOR 6 IN. PROBE

Temp Sensor, 6” Immersion, Acc: +/- 0.2 C, 10K Ohm Thermistor, Continuum, Steel Encl.

Duct Poiint Temperature Sensor, 10k Ohm Type 2 Thermistor, 18 Inch Probe

TEMP SENSOR; 1000 OHM; PT; FOR WALL MTG.

Cable Clamp Standard Size Thermocouple Connectors

Duct/Immersion sensor Temperature passive, NTC20k, Probe length 6” [150 mm], Probe diameter 0.24” [6 mm]

Eaton E51 NEMA limit switch inductive proximity sensor reflector

STP Series pocket STP, 100 mm/3.94 in., brass

WELL TEMP SEN 6” 1K NI; WELL INSERTION TEMPERATURE SENSOR;1K OHM NICKEL 6 IN. PROBE

TE-6312M-1; WELL; 1000 OHM NICKEL WELL INSERTION 8 INCH PROBE