Fireye HVAC/R

UV scanner, ½” NPT connector, 6 ft. cable rated for Tray Cable - Exposed Run (TC-ER).

Program Module

Chassis UV Self Check 120V

120 VAC, 50/60 Hz Chassis.

UV scanner, ½” NPT connector, 3 ft. cable rated for Tray Cable - Exposed Run (TC-ER).

120 VAC, 50/60 Hz Chassis with standard plug-in daughter board

Ultraviolet amplifier, use with UV1, UV2, UV8, UV90, or 45UV3.

UV amp, 3 sec FFRT. Use with UV1, UV2, 45UV3.

2 line x 16 character backlit LCD display with keypad.

Pressure Transducer

Ultraviolet self check amplifier. Use with 45UV5-1005, -1007, -1008, -1009, or 55UV5-1007, -1009.

½” NPT straight UV scanner, 6 ft flex conduit with insulated nylon coupling.

Firetron cell for 48PT2 only.

Open wiring base for cabinet mtg., use with D Series and FLAME-MONITOR.

Infrared scanner, 8’, 90 degree head, BurnerLogix, E-Series, MicroM

Display 2 Lines 16 Characters

UV Self Check A 3 sec. FFRT

Infrared autocheck amplifier, use with 48PT2.

SERVO-Motor 24VDC

Programmer, Selectable recycle/non-recycle function, TFI timing, purge timing, post purge, prove open at start.

½” NPT, 90 degree UV Scanner. 10 ft unshielded cable

Infrared scanner, 8’, straight head, BurnerLogix, E-Series, MicroM

Programmer Module 10 STFI Select Purge

Keypad selectable parameters, non-recycle operation, modulation, open/closed damper proving, 4 second FFRT

Flame Sensor Module UV/UV-Self Check

Flame rect amp. 2-4 sec FFRT. Use with 69ND, 45CM.

Infrared scanner, 4’, 90 degree head, BurnerLogix, E-Series, MicroM

UV amp, 2-4 sec FFRT. Use with UV1, UV2, 45UV3.

1” NPT self-check UV scanner

Union with quartz lens, ½” for UV1A.

Infrared scanner, 4’, straight head, BurnerLogix, E-Series, MicroM

Scanner ½ NPT 12 ft UV

UV amp, .8 sec FFRT. Use with UV1, UV2, 45UV3.

UV Scanner ½ 90 Deg 6 ft

Heat insulator, 1” NPT for 45UV5.

Chassis, 120 VAC, 50/60 Hz with UV non self-check amplifier. UL, FM, CE Approved.

Temperature Sensor 32 Deg-752 Deg F

Temperature sensor, Range 32 deg. F to 752 deg. F (0 deg. C to 400 deg. C), 4-20 mA output, linear with temperature

Closed wiring base for surface mtg., use with M-Series II and MicroM.

Keypad/Display, 2 line X 16 characters, LIQUID CRYSTAL DISPLAY (LCD), with cable. Operates -4F (-20C) to +140F (+60C).

Infrared amp, 3 sec FFRT. Use with 48PT2 scanner.

Scanner ⅜ NPT

120 VAC, 50/60 Hz Chassis with alpha-numeric display interface to ED510.

Flame rect amp. 3 sec FFRT. Use with 69ND, 45CM.

Closed wiring base for surface mtg., use with D Series and FLAME-MONITOR.

UV Tube

Amplifier, for use with EP178 / EP378 and one or two 85UVF4-1QDWR, 85IRF4-1QDWR, or InSight flame scanners (with 59-497-020WR cable).

UV Scanner Standard Mount with Tube

Infrared autocheck amplifier, use with 48PT2. Special application only, consult factory.

Remote display (ED510) mounting kit with 8’ cable.

1” NPT mounting flange for Phoenix Series II and InSight Scanner, includes 35-127-1.

Expansion module wiring base.

Chassis, 120 VAC, 50/60 Hz with IR Auto-Check amplifier. UL, FM, CE Approved.

Micro M Chassis

UV amp, 0.8 sec FFRT. Use with UV1, UV2, 45UV3.

Replacement Power Module for Multi-flame system.

Vacuum Fluorescent Display (VFD) for InSight II flame scanner.

Display module for 25SU5-5011/50125166/5168.

Wiring base for MBCE-110/-230 FR and UV flame sensor.

NEMA 4 UV Scanner, ½” NPT, 11 ft shielded cable with insulated nylon coupling.